gem-hunter
Language: Rust
A bunch of lints to catch common mistakes and improve your Rust code. Book: https://doc.rust-lang.org/clippy/
A collection of lints to catch common mistakes and improve your Rust code.
There are over 800 lints included in this crate!
Lints are divided into categories, each with a default lint level.
You can choose how much Clippy is supposed to annoy help you by changing the lint level by category.
| Category | Description | Default level |
|---|---|---|
clippy::all |
all lints that are on by default (correctness, suspicious, style, complexity, perf) | warn/deny |
clippy::correctness |
code that is outright wrong or useless | deny |
clippy::suspicious |
code that is most likely wrong or useless | warn |
clippy::style |
code that should be written in a more idiomatic way | warn |
clippy::complexity |
code that does something simple but in a complex way | warn |
clippy::perf |
code that can be written to run faster | warn |
clippy::pedantic |
lints which are rather strict or have occasional false positives | allow |
clippy::restriction |
lints which prevent the use of language and library features1 | allow |
clippy::nursery |
new lints that are still under development | allow |
clippy::cargo |
lints for the cargo manifest | allow |
More to come, please file an issue if you have ideas!
The restriction category should, emphatically, not be enabled as a whole. The contained
lints may lint against perfectly reasonable code, may not have an alternative suggestion,
and may contradict any other lints (including other categories). Lints should be considered
on a case-by-case basis before enabling.
Table of contents:
Below are instructions on how to use Clippy as a cargo subcommand, in projects that do not use cargo, or in Travis CI.
One way to use Clippy is by installing Clippy through rustup as a cargo subcommand.
You can install Rustup on supported platforms. This will help us install Clippy and its dependencies.
If you already have Rustup installed, update to ensure you have the latest Rustup and compiler:
rustup update
Once you have rustup and the latest stable release (at least Rust 1.29) installed, run the following command:
rustup component add clippy
If it says that it can't find the clippy component, please run rustup self update.
Now you can run Clippy by invoking the following command:
cargo clippy
Clippy can automatically apply some lint suggestions, just like the compiler. Note that --fix implies
--all-targets, so it can fix as much code as it can.
cargo clippy --fix
All the usual workspace options should work with Clippy. For example the following command
will run Clippy on the example crate:
cargo clippy -p example
As with cargo check, this includes dependencies that are members of the workspace, like path dependencies.
If you want to run Clippy only on the given crate, use the --no-deps option like this:
cargo clippy -p example -- --no-deps
Clippy can also be used in projects that do not use cargo. To do so, run clippy-driver
with the same arguments you use for rustc. For example:
clippy-driver --edition 2018 -Cpanic=abort foo.rs
Note that clippy-driver is designed for running Clippy only and should not be used as a general
replacement for rustc. clippy-driver may produce artifacts that are not optimized as expected,
for example.
You can add Clippy to Travis CI in the same way you use it locally:
language: rust rust: - stable - beta before_script: - rustup component add clippy script: - cargo clippy # if you want the build job to fail when encountering warnings, use - CARGO_BUILD_WARNINGS=deny cargo clippy # in order to also check tests and non-default crate features, use - CARGO_BUILD_WARNINGS=deny cargo clippy --all-targets --all-features - cargo test # etc.
Note that setting CARGO_BUILD_WARNINGS=deny will cause your build to fail if any warnings are found in your code.
That includes warnings found by rustc (e.g. dead_code, etc.). If you want to avoid this and only cause
an error for Clippy warnings, use #![deny(clippy::all)] in your code or -D clippy::all on the command
line. (You can swap clippy::all with the specific lint category you are targeting.)
Also note that before Cargo 1.97, the usual way to deny all warnings was by using -D warnings:
cargo clippy -- -D warnings
However, CARGO_BUILD_WARNINGS has the benefit of not invalidating build caches,
and is thus to be preferred going forward.
You can add options to your code to allow/warn/deny Clippy lints:
the whole set of Warn lints using the clippy lint group (#![deny(clippy::all)]).
Note that rustc has additional lint groups.
all lints using both the clippy and clippy::pedantic lint groups (#![deny(clippy::all)],
#![deny(clippy::pedantic)]). Note that clippy::pedantic contains some very aggressive
lints prone to false positives.
only some lints (#![deny(clippy::single_match, clippy::box_vec)], etc.)
allow/warn/deny can be limited to a single function or module using #[allow(...)], etc.
Note: allow means to suppress the lint for your code. With warn the lint
will only emit a warning, while with deny the lint will emit an error, when
triggering for your code. An error causes Clippy to exit with an error code, so
is useful in scripts like CI/CD.
If you do not want to include your lint levels in your code, you can globally enable/disable lints by passing extra flags to Clippy during the run:
To allow lint_name, run
cargo clippy -- -A clippy::lint_name
And to warn on lint_name, run
cargo clippy -- -W clippy::lint_name
This also works with lint groups. For example, you can run Clippy with warnings for all lints enabled:
cargo clippy -- -W clippy::pedantic
If you care only about a single lint, you can allow all others and then explicitly warn on the lint(s) you are interested in:
cargo clippy -- -A clippy::all -W clippy::useless_format -W clippy::...
Some lints can be configured in a TOML file named clippy.toml or .clippy.toml. It contains a basic variable = value mapping e.g.
avoid-breaking-exported-api = false disallowed-names = ["toto", "tata", "titi"]
The table of configurations contains all config values, their default, and a list of lints they affect. Each configurable lint , also contains information about these values.
For configurations that are a list type with default values such as
disallowed-names,
you can use the unique value ".." to extend the default values instead of replacing them.
# default of disallowed-names is ["foo", "baz", "quux"] disallowed-names = ["bar", ".."] # -> ["bar", "foo", "baz", "quux"]
Note
clippy.tomlor.clippy.tomlcannot be used to allow/deny lints.
To deactivate the “for further information visit lint-link” message you can
define the CLIPPY_DISABLE_DOCS_LINKS environment variable.
Projects that intend to support old versions of Rust can disable lints pertaining to newer features by specifying the minimum supported Rust version (MSRV) in the Clippy configuration file.
msrv = "1.30.0"
Alternatively, the rust-version field
in the Cargo.toml can be used.
# Cargo.toml rust-version = "1.30"
The MSRV can also be specified as an attribute, like below.
#![feature(custom_inner_attributes)] #![clippy::msrv = "1.30.0"] fn main() { ... }
You can also omit the patch version when specifying the MSRV, so msrv = 1.30
is equivalent to msrv = 1.30.0.
Note: custom_inner_attributes is an unstable feature, so it has to be enabled explicitly.
Lints that recognize this configuration option can be found here
If you want to contribute to Clippy, you can find more information in CONTRIBUTING.md.
Copyright (c) The Rust Project Contributors
Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or https://www.apache.org/licenses/LICENSE-2.0> or the MIT license <LICENSE-MIT or https://opensource.org/licenses/MIT>, at your option. Files in the project may not be copied, modified, or distributed except according to those terms.
Some use cases for restriction lints include:
clippy::else_if_without_else).clippy::todo).clippy::unwrap_used).#[forbid(clippy::float_arithmetic)] on a module).